Best All mobile Repairing solutions

Samsung Tab 3 T211 Sim Card Track Problem Jumper Ways Solution Here

Samsung Galaxy Tab 3 T211 Insert Sim IC Solution Jumper Problem Ways

Samsung Galaxy Tab 3 T211 Insert Sim IC Solution Jumper Problem Ways http://goo.gl/FuObJw
Here’s the solution for Samsung Tab 3 T211 with Insert Sim card error related problems such as “sim card not inserted or insert Sim card”, this solution may help fix the Samsung Tab 3 T211 if it doesn’t detect or accept any sim card module inserted to it. http://goo.gl/FuObJw http://goo.gl/FuObJw
The solution below provides and shows the Sim card circuit connection of the Samsung Tab 3 phone and quickly tells us which particular or certain components needs to check during troubleshooting procedures. http://goo.gl/FuObJw
Most probably it happens due to water and rust or damage parts in Samsung T211.
So make sure sim can be fix proper in sim jacket. And sim jacket is not damage and broken.
Samsung Tab 3 T211 Insert Sim Card Error Problem Solution

Replace the sim and try again. Check notification on the screen.
After disassemble of Samsung T211 check mother board for water and rust and make it clean with electronics clean to and apply hot air to make it dry. http://goo.gl/FuObJw
Check all these tracks that are given in above diagram and apply jumpers as shown in diagram to solve insert sim problem solution with jumpers in Samsung Tab 3 T211.
Samsung Galaxy Tab 3 T211,Insert Sim,Sim,Solution,Jumper,Problem,Ways

LINK 1 LINK 2

Samsung I9103 Galaxy R I9103 Ear Speaker Problem Jumper Solution

By Unknown11:59 AMsamsungNo comments

Samsung I9103 Galaxy R I9103 Ear Speaker Problem Jumper Solution

Samsung GT-I9103 Ear Speaker Not Working Solution

Samsung I9103 Earpiece Spaker Jumpers Solution Problem Ways

http://goo.gl/dH3HZ0

Samsung Galaxy Grand Duos I9103 cellphone Speaker Earpiece Not Working Problem Solution Jumpers are available in this diagram that is posted with this post.some times we face speaker problem in Samsung I9103 low voice or no voice some time ringer is working but speaker is not working while in other case speaker work but ringer is not working in all these problems you have to follow a few steps given bellow and problem will be solve easily and quickly in cellphone. http://goo.gl/dH3HZ0

Open Mobile and check speaker points with a meter if they do not show continuty then speaker is dead and if they show a good value chak speaker attachement prints on board do they have value also then change speaker with new one.if speaker changing can not solve this issue check all these parts and track that used in speaker function in Samsung GT-I9103
All parts components and tracks can be found in diagram above so check these components and also clean near by area of these parts.dry it with hot air and ceck all tracks with meter if missing apply jumpers and you may can change resold or replace these parts one by one till you solve Samsung Gt-I9103 Speaker Solution Jumper Problem Ways Earpeace

Samsung I9103,Speaker ,Earpeace,Solution,Jumper,Problem,Ways
Samsung Gt-I9103,Speaker Problem,Speaker Solution,Speaker Jumpers,Speaker Ways

LINK 1 LINK 2

LG E730 Power Key Jumper On Off Key Ways Repair Solution

By Unknown11:49 AMLGNo comments

LG E730 Power Key Jumper On Off Key Ways Repair Solution

LG E730 Power On Off Key Button Switch Jumper Ways
LG E730 charging ok, flash ok, but not powering phone, this mean power button cut/line problem.So now follow simple power button jumper ways. http://goo.gl/7h0vHE

If you are facing an energy problem in LG E730 diagrams in this article can help. Continue with the following troubleshooting solutions and establish bridges necessary for the points that have been damaged.

LG E730 Dead does not start Solution
LG E730 keys Power Jumper
LG E730 Champ Duos On Off Button Ways
LG E730 Champ Duos power button point

Trick damaged bridge. Trace point of damage to the meter or check off switch with a new one. We can check problem button to connect the phone to the charger with mobile entertainment indicator appears on the screen and pressing the power button, then this is a power button problem. See diagram and apply jumpers as diagram. LINK 1 LINK 2
LG E730 On Off Button Ways Power Key Jumper Solutio Repair Soluion

Apple iPhone 6 Plus Secret Codes

By Unknown11:41 AMiphoneNo comments

Apple iPhone 6 Plus Secret Codes, New Apple iPhone Six Hidden Code

Secret Codes helps you to access some internal functions of mobile which are intended for developers and troubleshooting purposes. They are the combination of numeric and Special Characters like * and #.These codes can give you access to the whole new world of hidden menu, diagnostics test and much more. http://goo.gl/jWMPra

The iPhone 6 Plus is 5.5 inches diagonally and the iPhone 6 is 4.7 inches, compared to the iPhone 5S size of 4 inches. The phones are thinner than ever: 6.9 mm for the iPhone 6 and 7.1 mm for the larger iPhone 6 Plus.
The bigger version has been named as iPhone 6 Plus and it has a 5.5 inches display with a resolution of 1920*1080 pixel which is able to deliver a PPI of 401, thats over 2 million pixels OMG!!!

Secret Codes of iPhone 6

Here I am giving you some secret codes of iPhone 5S which will help you to troubleshoot some problems or just to check functionality of you mobile. http://goo.gl/jWMPra

Firstly open the Dial Pad of your Mobile (where you dial numbers)

1. 3001#12345# and tap Call.

Enter Field Mode. Field mode contains lots of iPhone inner settings, especially newest network and cell information.

2. *#06#

Shows your IMEI. No need to tap Call. IMEI is the unique identifier for your mobile phone hardware.

3. *#21# and tap Call.

Set interrogation for call forwards. Discover the settings for your call forwarding.

You’ll see whether you have voice, data, fax, SMS, sync, async, packet access, and pad access call forwarding enabled or disabled.

4. *#30# and tap Call.

Check the calling line presentation. This shows whether you have enabled or disabled the presentation of the calling line, presumably the number of the party placing the call.

5. *#76# and tap Call.

Check whether the connected line presentation is enabled or not. State whether the connected line presentation is enabled or disabled. Similar to the calling line presentation.

6. *#43# and tap Call.

Determine if call waiting is enabled. Shows call waiting status for voice, data, fax, SMS, sync data, async data, packet access and pad access. Each item is either enabled or disabled.

7. *#61# and tap Call.

Check the number for unanswered calls. Show the number for voice call forwarding when a call is unanswered. Also show the options for data, fax, SMS, sync, async, packet access and pad access.

8. *#62# and tap Call.

Check the number for call forwarding if no service is available. Just like the previous, except for no-service rather than no-answer situations.

9. *#67# and tap Call.

Check the number for call forwarding when the iPhone is busy. And again, but for when the iPhone is busy.

10. *#33# and tap Call.

Check for call control bars. Check all the usual suspects ( voice, data, fax,SMS, etc ) to see whether barring is enabled or disabled for outgoing.

11. ##002#

This code disable all call Forwading

12. *#31#

Allows you to hide your number

13. *777# and tap Call.

Account balance for prepaid iPhone only.

14. *225# and tap Call.

Bill Balance. ( Postpaid only )

15. *646# and tap Call.

Check minutes ( Postpaid only ).

CAUTION: Dont mess unless you know what you are doing LINK 1 LINK 2

How To Unloak Pattern Lock From Mtk Android Using Volcano Box

By Unknown11:21 AMvolcano boxNo comments

How To Remove Pattern Lock From Mtk

Android Using Volcano Box

Volcano Box Reset Pattern Lock,Root,Wipe Without Usb Debugging Solution
MTK Android Reset Pattern Lock,Root,Wipe Without Usb Debugging With Volcano Box
http://goo.gl/l5rx6v

Step-1 Download Software
2-Install Mauimeta_exe_3g_v6.1316.1
3- Open Software
4- Click Options

5- Click Connect Smart Phone Into Meta Mode
6- Click Reconnect Button

7- Power Off Phone
8- Insert Battery
9- Hold Volume Up Button & Insert Usb Cable
10- Update Adb Driver
When Your Phone Go To Meta Mode Release Boot Key
11- When You Will See Adb Interface On Device Manager

12- Your Phone Ready To
Reset Gmail,Root,Wipe
13- Open Volcano Box Software

14- Go To Android Tool
15- Select Adb Mode
16- Do Adb Root, Reset Gmail,Wipe, Backup Flash, Unlock,Etc

LINK 1 LINK 2

How To Root Samsung Galaxy S3 SCH-R530C using Odin

By Unknown10:52 AMsamsungNo comments

Root Samsung Galaxy S3 SCH-R530C using Odin

Step 1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer then Skip this Step. http://goo.gl/nvrBN4

DOWNLOAD USB DRIVER

Step 2: Download and extract the root files on your computer. After extracting you will be able to see the following files:

Download Root File LINK 1 LINK 2

Step 3: Now, Switch off your Smartphone.

Step 4: After switching-off the phone, you need to boot into Download Mode. To boot into download mode Press and hold Zoom Left and Power button at same time for 5-8 seconds until download mode is active.

Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Zoom Right key to continue.

Step 6: Now, Open Odin3 (found in the extracted files, that you have downloaded in the Step#2) on your computer. Then connect your Smartphone to the computer.

Step 7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.

Step 8: Once your device is detected by Odin, click on the PDA button and select the CF-Auto-Root.tar file (you have downloaded this file in step#2). http://goo.gl/nvrBN4

Step 9: Now, click on the Start button in Odin to begin the Flashing.

Step 10: Flashing usually takes 30-50 seconds to complete the rooting process on your Samsung Galaxy S3 SCH-R530C. Once Rooting process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process Smartphone will re-boot automatically.

Step 11: Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

Step 12: Now, to make sure you have successfully rooted your Samsung Galaxy S3 SCH-R530C, open Applications Menu on your Smartphone and Find SuperSU App. If this app exist on your Smartphone then it means you have successfully rooted your device. Congratulations.

Optional: You can also verify that your device is successfully rooted or not by Root Checker Application.