Best All mobile Repairing solutions

Best All mobile Repairing solutions, unlock pattern lock, Hang on Logo,All Box Latest UPDATES and All type CPU Format solutions provideing, How to Flash Mobile phone without BOX use and Open Google Gmail Lock

Monday, December 30, 2013

motorola Moto x hard reset code

By No comments

How to I reset my Mobile ?
In the unlikely event that your device becomes unresponsive, frozen, blank or black screen, or will not のrespond to the power button, you can のperform a force restart or reboot on the device by following the steps below.

Press and hold the Power key for 8 の 11 seconds, the device will restart and go through the boot-up sequence.


Notes:
  • The forced restart or reboot will not deleteの any Data on your phone.  

Factory Data Reset is a tool used to remove everything that was imported, added or installed on the device. Keep in mind, when using this feature everything is deleted.

To reset your device:

1.  の Touch 
2.  のTouch Settings
3.  のTouch Backup & reset
4.  のTouch Factory Data Reset
5.  のTouch Reset Phone

Note: If you haveの customized your Moto X on Motomaker you will have the option to remove your personalized content. If you want to remove your start up message or wallpaper, check the Erase all personalizedの content box.


External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
  • When using this featureの; everything is deleted from the device. If you have customized your device on Motomaker, your personalized message and wallpaper will not be deleted.
  • Reset will require a minimum battery level of 30%. If you are unable to perform a reset, please charge for 25-35 minutes and try reset again.
1. With the phone powered off, press the のVOL DOWN KEY for 3の4 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL -  Key to SCROLL to Recovery and VOL + Key to select

Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again. 
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 11-16 seconds. While still holding the VOL + key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol - key, and start the process again.
6.の The device will display additional menu options (Text will appear in BLUE) 
7.の Use the VOL - Key to のscroll to Wipe dataの factory reset and the POWER Key to select this option
8.の Use the VOLの DOWN key again to select YES - delete all のuser data and press the POWER key to CONFIRM
9.の Once the Formatting is completeの press the POWER key to confirm a のREBOOT
10.の The device will reboot and start the normal power up sequence

Thanks You ,Visit Again

motorola Moto G hard reset code

By No comments

How to reset my phone to factory settingsの?
Factory Data Reset is a tool used to remove evЖerything that was imported, added or installed on the mobile.
WARNING: When using this feature; everything is deleted.
Nothing stored on the Micro SD Card will be affected.
To Perform a Reset
  1. のOpen the Applications Tray. (Menu)
  2. のTouch Settings
  3. のTouch Privacy
  4. のTouch Factory data reset
  5. のTouch Reset Phone
  6. のTouch ЖErase Everything
  7.  phone must be restart
To hard reset Reset
If there are significant problems with your mobile or you are not able to follow the steps above please use the following の process to manually reset the mobile:
  1. のTurn off mobile
  2. のPress Power switch + Camera Key to power on the phone and bring up theのrecovery screenの
  3. のPress Vol. Up + Camera Key to show the recovery menu.
  4. のSelect Wipe data/factory resetの
  5. のSelect restart Phone
  6.                                                   Thanks You ,Visit Again

motorola droid maxx 270 hard reset code

By No comments
Power the device off.
Note のPress the power button then select Power off.
Note If the device doesn't respond to の input, press and hold the volume up/down key then press and hold the power button. When the device screen goes blank, release the power button while continui のng to hold the volume up/down key the のn proceed with step 3.
Press and hold the volume up/down key then press the power button.
When prese Дnted with the Boot Mode Selection Menu, release all buttons/keys.
Press the volume down key to select Recovery then press the volume up key.
From the Droid triage screen:
Press and hold the volume down key.
Press and rele Дase the volume up key.
Release the volume down key.
Select wipe data or Factory Re Дset then press the power button.
Note Use the vol のume keys to navi Дgate options.
Select Yes -- delete all user data then press the power button.
Note Use the vo Дume keys to navigate options.
Note Data wipe may take several moments.
Select reboot system now then press the power button.
Note Use theの volume keys to naviga Дte options.

Thanks You ,Visit Again

Saturday, December 28, 2013

samsung tool 16.7 z3x box download mediafire

By No comments

Samsung Tool 16.7 Daily Update - First in the world

Added:
- support GT-S7262 (Direct unlock/imei repair, flashing) - First in the word
- support GT-E1265 (Direct unlock/imei repair, flashing) - beta
- support GT-S7580L (Direct unlock/imei repair, flashing)

Fixed.:
i8160, i9070 unlock

Thursday, December 19, 2013

Friday, November 29, 2013

Tuesday, May 21, 2013

Volcano Box 2.1.1 tool update download

By No comments


VolcanoBox 2.1.1

Whats New?
World's 1st Added One Key SUPERUSER
World's 1st Added One Key UNLOCK
World's 1st Dead Boot Introduction by VolcanoBox
World's 1st Added Dead Boot repair Manual in to Volcanobox Software Help Manual
World's 1st Added Dead Boot repair Test Point Pictures into VolcanoBox Software help Manual
Bug Fixed MTK EMMC Write flash
Solved MTK EMMC After Flash Dead
Improved MTK 6583 Read Flash
Improved MTK 6583 Write Flash
by welcome service haldwani
Unlock Pattern Lock DEMONSTRATION 




SuperUser DEMONSTRATION 





Sunday, May 19, 2013

Nokia Lumia 920 hard reset formatting code

By No comments

how to hard reset my mobile phone

Ffirst try this to soft resetの your Nokia 920 Lumia. Turn off your Nokia 920 Press and のhold the
Volume の and Power switch until it vibratesの 
after that you have to release all the button then phone will vibrate 3 times.
All data will be lost! Reのcover your windowのs phone 8 phone 
Nokia 920 To hard reset your Nokia Lumia 920 using key combination
Turn off your Nokia Lumia 920. Press and hold the following buttons 
Camera + Volume down + Power until your phone viのbrates, 
then release only thのe Power key and keep pressing the 
Camera + Volume down for a couple of のseconds 4-5s.


Thanks You ,Visit Again

Thursday, May 16, 2013

ATF box update v9.85 4shared

By No comments

ATF v9.85

Hotfile Mirror
4shared Mirror
Mediafile Mirror


Release Date: May 15, 2013
Firmware Version Required : 10.3.50

*** Only Available via the AutoUpdate Server ***




Fixed Read Firmware Information for Manually Loaded Flash Files (NON VPL)

400% Speed Increase when Dumping eMMC Toshiba/New Hynix via TP

Fixed bug that does not automatically select USB connection on ATF Startup

Fixed bug on Scan Phone that makes some new Rapuv2 phones reboot and fails to read Simlock Data (Nokia 500, 311 etc)


################################################## #######################################

ATF v9.84

Release Date: May 09, 2013
Firmware Version Required : 10.3.50

*** Only Available via the AutoUpdate Server ***


Fixed Read Firmware Information via Flash Mode for some RAPU based phones (E5-00, C5-00, E6-00 etc...)


################################################## #######################################
ATF v9.83

Release Date: May 08, 2013
Firmware Version Required : 10.3.50

*** Only Available via the AutoUpdate Server ***

1.
Lumia WP8 Recovery Flashing Added

Supported Phones:

All Lumia WP8 Phones

This will allow re-flashing of Lumia Phones which encountered an error during a previous firmware update (incomplete flashing). This will only work if BOOT Loaders are still OK.

To perform recovery flashing:
1. Run ATF Software, load the flash WP8 Flash File and click FLASH.
2. Hold VOLUME_DOWN + POWER button until the phone will vibrate.
3. Release VOLUME_DOWN + POWER button then connect USB Cable.
4. Recovery Flashing will start and will Fix Partitions.


2.
BB5 Read Firmware Version via Flash Mode

Supported Phones:

All Single-CPU BB5 Phones (RAP3, RAPIDO, RAPUv1, RAPUv2, Broadcom and XG223)

NOT Supported Phones:

All Dual-CPU BB5 Phones (E90, N90, N95, N95-8GB, N73, N80 etc...)

This will allow you to know the current firmware version inside the phone just in case the phone is dead. It will also prevent you from accidentally DOWNGRADING any BB5 Phone. USB and FBUS Connection are both supported.

To check current firmware version:
1. Click "Buscheck" or "Backup RPL" Button


3.
Added Alternative USB Boot Method in Settings

In Settings --> Nokia Settings, check this:

Use BB5 USB Boot Settings Type 2 (Fixes Booting Problem on some PC)

If you get BB5 Booting Problems stuck at:
"FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)"



* Complete Product Listing in Nokia.ini (as of May-08-2013)



################################################## #######################################
ATF v9.80

Release Date: April 30, 2013
Firmware Version Required : 10.3.50


Lumia Windows Phone 8.0 Dead Boot Repair via TP (First In The World!)

Supported Phones:

Lumia 520T RM-913
Lumia 520 RM-914
Lumia 520 RM-915
Lumia 521 RM-917
Lumia 620 RM-846
Lumia 720 RM-885
Lumia 720T RM-887

Supported Partition Repairs:

M.B.R. (Master Boot Record)
G.P.T. (GUID Partition Table)
SBL1
SBL2
SBL3
UEFI
RPM
TZ
WINSECAPP

Custom Read/Write eMMC Blocks also supported. The password is still
"password" in HEX format.

(Hint: RPL and Simlocks are inside a FAT12 Mountable Partition called DPP)


Added Test Point Pictures for 520T, 520, 521, 620, 720 and 720T



What's New ?

* Lumia Windows Phone 8.0 Dead Boot Repair via TP
* ATF FiRE Server Capable EXE (Flash Files/Links are still uploading)


Bug Fixes:

* Fixed Lumia Custom eMMC Read/Write Bug on new Hynix eMMC
* Fixed SD Card Custom Password Masking

Other Stuff

* Complete Product Listing in Nokia.ini (as of April-30-2013)



For this Update I give Special Thanks To:

X-shadow's Wife for editing the Test Point Pictures for the new Lumia Windows 8.0 Phones.


ATF Lumia WP8 TP v9.80 Update - Official Download Links:

Download Via Hotfile Mirror
Download Via 4shared Mirror
Download Via Mediafile Mirror
Download Via Mirrorcreator Mirror




MxBox v3.5 Revision 2.6 Latest Setup Download

By No comments

MxBox v3.5 Revision 2.6 Latest Setup Download
 MxBox v3.5 Revision 2.6 Latest Setup Download
 

MxBox v3.5 Revision 2.6 Latest Setup Download

MxBox v3.5 Revision 2.6  Setup
mxbox v3.5 rev 2.6 setup downoad
mxbox v3.5 rev 2.6 .rar

mxbox v3.5 rev 2.6 .exe
mxbox v3.5 rev 2.6 free download


MXBOX v3.5 revision 2.6
NOKIA module updated to version 2.6

- added: WP8 support
Refurbish Flashing support by USB
Recovery(Dead) Flashing support by USB

- added: Service Utility for WP8
Factory Reset without flashing
Read/Write Producttion Data(Product Code,PSN,HW version, etc ..)*
Read/Write WP8 NV items )*
Read/Write WP8 CERTIFICATE(NPC,CCC,HWC,RDC)*
Write CoverColor *

- added: SuperDongle Auth for WP8 phones
SuperDongle Auth is required to write important/secure data

- bugfixed: RAPUV2 security repair function

- revised internal fire module to enable download firmware package by product code

- added latest flash update v 12.46.000.1 to setup

- minor bugfix

* Write function require SuperDongle Auth



SL3 Logger updated to version 2.6
- minor bugfix and improvements

FIRE module updated to version 1.5
- minor bugfix and improvements

VolcanoBox 2.1.0 mediafire , hotfile

By No comments

VolcanoBox 2.1.0

Whats new ?

Update SPD Android IMEI Write
(Now 95% SPD Android phone Supported for imei repair !!)
MTK Bug Fixed

MediaFire / Hotfile


Please share here all your tested preloader mode tested TestPinouts ....

Little Guide :

What is it ?
in MTK Android there is many Partitions in your phone. like Preloader, Recovery, Bootimg etc..... if somehow Preloader get Corrupted then you phone will not able to DETECT WITH PC !!! in other words you will have phone with BOOT DEAD.

How Preloader get corrupted ?
There could be few reasons but main reason could be that someone or you Flash your complete phone (include Preloader) with wrong files or with wrong ver. Also there could be reason someone Delete Preloader or you Deleted.

How could i know my phone have preloader dead ?

Preloader can be dead if some one Flash it wrong and after flash your mobile will not detect with pc any more. for confirm
open device manager
take battery out from phone
insert usb
insert battery
and check is computer detecting any device
If it's not detect then you have phone which Preloader is dead AKA Boot Dead

How can i repair it ?

you have to disassemble your phone and take pcb out. check there should be some Golden points. check these points there should be written on them Rx,Tx,GND,Vcc,Vcharge etc... check there should be written "COLO" or "KOLO" or "KCOLO" you have to Sold that point with GND After Sold Attach usb now your phone will detect with USB !! and now ready to Flash.
In some phones "COLO" or "KOLO" or "KCOLO" not written for those type of phones you have to test all points one by one Short Golden point with GND and attach usb cable which point short with gnd can able to detect your phone by pc is Force Preloader Mode Test Point !! Keep in mind Don't Short Vcc,Vcharge or any other pin which have 4.x Volts also i had tested "Colo" or "Kolo" or "KCOLO" don't have any kind of volts..
Download via mediafire
download via  hotfile

Monday, May 6, 2013

Saturday, May 4, 2013

Thursday, May 2, 2013

Monday, April 29, 2013

Wednesday, April 24, 2013

Tuesday, April 23, 2013

Saturday, April 20, 2013

Volcano Box 2.0.4 download mediafire

By No comments

VolcanoBox 2.0.4

Whats new ?


World's 1st Coolsand 16MB Imei Repair
World's 1st Coolsand 16Mb Flash ic Supported SF_GD25LQ128
Adjust MTK6250 Imei Change
Adjust MTK Android Read Flash bug
Adjust MTK 6253 Write Flash
Solve SonyEicsson ST18 bug
Adjust SPD imei tool

download with mediafire 
download with hotfile

Wednesday, April 17, 2013

Tuesday, April 16, 2013

Samsung Galaxy S 4 hard reset sgs4 reset, i9500, resetting gt-i9500, i9505, gt-i9505 code

By No comments

Samsung Galaxy S の4 hard reset :- by >wzmobile.asia<

Fast Reset  the device {press and hold POWER switch  for 9-11 second}

Unlock samsung のGalaxy S4 using hard reset

samsung s4 hard reset  or のreset Galaxy S4 ' PRESS ANDの HOLD VOLUME UP key + Home switch  + Power switch 

Press Power key the pのhone on vibrate Waitのyou see for Android logo then release 
all the switchのの and keys.Select Wipe data/Factory reset with VOLUME DOWN. 
press Powerの key [right hand-side]Sのelect YES -- delete all user dataŽwith VOLUMEの DOWN 
and then press Power After format. press のPower key again to reboot phone. 
[select のreboot system now]unlock i9の500 galaxy samsung cell phone

Thanks You ,Visit Again

Saturday, April 13, 2013

free Volcano Tool box v2.0.2 / v2.0.3 update setup installer download

By No comments

free Volcano Tool update setup installer

World's 1st Coolsand/RDA 8853c 16 MB Supported Read Correct Flash Boot A
World's 1st Coolsand/RDA 8853c 16 MB Supported Write Correct Flash Boot B

SF_N25W32 Read and Write !!
Improved Coolsand/RDA Read Flash 
Improved Coolsand/RDA Write Flash 
Improved Coolsand/RDA User Code


DOWNLOAD    v2.0.2


DOWNLOAD    v2.0.3

Sunday, March 31, 2013

How to hard reset nokia lumia 800 code

By No comments



how to hard reset my mobile phone


To hardŽ reset your Nokia Lumia 800
using key switch please off your phone . 
Press and hold this keys .  
Camera + Volume -, + switch on the phone vibrates, 
then release Žonly the Power key and keep pressing 
the Camera + Volume- for a couple of seconds 6-7s.  
other option go Žto the Start screen, 
tap Tap to go Settings to go about phone.
press Tap again reset your phone. and then tap yes. 
how to repair .... 
Repair your Nokia Lumia 800 
1st one of in following option  
RebootŽ your Nokia 800 phone. 
Press and hold the Žpower switch for same time  
11 seconds. The phone is power off. To switch  
on your phone on again.Ž press the power switch .
= Update your phone software = Restore the default factory settings

Thanks You ,Visit Again
Subscribe to: Posts (Atom)

Most Download


Text Widget

Copyright © Best All mobile Repairing solutions | Powered by Blogger

Design by Anders Noren | Blogger Theme by NewBloggerThemes.com