Samsung GT-S5830I charging jumper solution
Samsung S5830I connecter charging methods
Samsung GT-S5830I IC charging solution
That's the first thing you need to do (as mentioned below) check is to check the voltage at point 1. The voltage should be around 4.9V to 5V. The other test points are for the USB connector.
Samsung S5830I after you remove the corpse, the first thing you need before charging pin connector to the tank and check again.
Possible for open and short circuit Check fuse and diode.
Same problem charging methods Czech connector so marked in the picture below.
Hardware Solutions
Samsung GT-S5830I charging jumper solution
Samsung S5830I connecter charging methods
Samsung GT-S5830I IC charging solution
That's the first thing you need to do (as mentioned below) check is to check the voltage at point 1. The voltage should be around 4.9V to 5V. The other test points are for the USB connector.
Samsung S5830I after you remove the corpse, the first thing you need before charging pin connector to the tank and check again.
Possible for open and short circuit Check fuse and diode.
Same problem charging methods Czech connector so marked in the picture below.
Hardware Solutions
Samsung S5830I connecter charging methods
Samsung GT-S5830I IC charging solution
That's the first thing you need to do (as mentioned below) check is to check the voltage at point 1. The voltage should be around 4.9V to 5V. The other test points are for the USB connector.
Samsung S5830I after you remove the corpse, the first thing you need before charging pin connector to the tank and check again.
Possible for open and short circuit Check fuse and diode.
Same problem charging methods Czech connector so marked in the picture below.
Hardware Solutions
Samsung S5830I connecter charging methods
Samsung GT-S5830I IC charging solution
That's the first thing you need to do (as mentioned below) check is to check the voltage at point 1. The voltage should be around 4.9V to 5V. The other test points are for the USB connector.
Samsung S5830I after you remove the corpse, the first thing you need before charging pin connector to the tank and check again.
Possible for open and short circuit Check fuse and diode.
Same problem charging methods Czech connector so marked in the picture below.
Hardware Solutions