Best All mobile Repairing solutions, unlock pattern lock, Hang on Logo,All Box Latest UPDATES and All type CPU Format solutions provideing, How to Flash Mobile phone without BOX use and Open Google Gmail Lock

Friday, June 1, 2012

Nokia E5 Insert SIM Card Problem Solution

Nokia E5 Insert SIM card jumper ways tracks

Here's the solution for Nokia E5 with Insert Sim card error related problems such as "sim card not inserted or insert Sim card", this solution may help fix the Nokia E5 if it doesn't detect or accept any sim card module inserted to it.

The solution below provides and shows the Sim card circuit connection of the E5 phone and quickly tells us which particular or certain components needs to check during troubleshooting procedures.

Nokia E5 Insert Sim Card Error Problem Solution

In Nokia E5 the sim card operational circuit is controlled by the GAZOO IC. You may first check, clean the SIM card connector pins, then try to replace the highlighted components such as the capacitors and resistors.
Check the VSIM ( sim card supply voltage) and ground pin line paths. 
If all of the said components is okay, but the problem continues. The problem may possibly lies on a GAZOO chip. Reheating or reworking it might only fix the problem. And then replace if necessary.

Nokia E5 Solution for Headset Audio Problem - Jumper Ways


Nokia E5 Headset Jumper Ways
Here's the Nokia E5 Solution for headset audio problem on both earpiece and microphone. This solution provides the connection line paths and certain components of the headset circuit of Nokia E5.
Just figure out the solution below and follow some step by step hints we provide.

This solution may woks if you already tried using another working headset but still the problem exists.

Nokia E5 Headset Problem Jumper Ways

The solution above shows the connection of the headset AV jack connector terminal pads which is useful in high level troubleshooting procedures. It also includes the filter ICs connection for jumper remedies. 

Hints in troubleshooting the headset problem on Nokia E5:
1. Check, clean or replace the headset AV jack connector.
2. Clean the AV jack connector terminal contact pads. 
3. Trace the each particular connection like the microphone or the earpiece.
4. Check, replace the connected components on a particular connections

Nokia E5 memory card not detected problem- MMC solution

Nokia E5 MMC jumper ways

This solution covers for Nokia E5 MMC memory card not detected problem solution. This may possibly help fix if the phone does not detect any microSD memory card inserted to it.

The solution below will show us the brief connection line paths of the Nokia E5 PCB board MMC circuit.
Just refer to it and follow some procedures how the way we troubleshoot the memory card not detected problem.

Nokia E5 MMC Connection Circuit

Hints in troubleshooting Nokia E5 memory card not detected problem:
1. Try to use another working microSD card.
2. If the memory card slot is oxidized, clean it with a cleaning kit.
3. Check the VMEM voltage (the red line) and the ground pins. 
4. Reheat, rework the GAZOO IC, replace if necessary.

Nokia E5 Not Charging Problem Solution - Charge Ways


This is a Nokia E5 solution for 'Not Charging Problem' or if phone shows no charging indication when the battery charger is plug-in. The solution below shows the primary components that needs to be check if the charging problem occurred.

Just refer to it and locate the highlighted components then follow some simple procedures we provide below.

Nokia E5 Not charging problem repair solution
Repair hints for Nokia E5 Not Charging Problem:
1. Try to use another working charger.
2. Check, clean or replace the charging pin connector if oxidized. 
3. Clean the charging pin connector terminal contact pads.
4. Check/ replace the fuse and the chip diode.
5. Check/replace the highligted transistor, resistors and capacitor.
6. If the above procedure won't fix the problem, the possible faulty is the GAZOO IC.
7. Reheat, rework the GAZOO chip, replace if necessary

Nokia E5 Buzzer, Ringer IHF Speaker Problem Solution


Nokia E5 buzzer jumper ways
Here's the Nokia E5 Buzzer, Ringtone Speaker Problem Solution. This may help fix the phone if there is no ringtone sound, or media audio sound output can be heard on it.

Just refer to the solution below and locate the primary component parts which need to check first if the buzzer problem occurred on Nokia E5. We also includes  a simple step by step procedures on how to troubleshoot this problem.
Nokia E5 Buzzer, Ringer Speaker Jumper Ways
Repair hints for Nokia E5 buzzer speaker not working problem:
1. Check the IHF speaker using a multimeter, replace if found damaged.
2. Clean the IHF speaker terminal contact pads on the PCB board if oxidized.
3. Check/replace the speaker filter coil.
4. Trace both negative and positive connection paths.
5. Check/replace the coils and capacitors near the GAZOO IC.
6. If the problem continues, the problem may possibly lies on the GAZOO IC, reworking or replacing it might only fix the problem. Enjoy

Nokia C2-03 White Screen, No LCD Screen Display Problem Solution

Nokia C2-03 White Screen display solution


This solution covers to fix Display problem for Nokia C2-03, C2-06 and C2-08 Dual SIM card slider phone. These are just simple hints on how to troubleshoot display problems such as white screen, empty or black screen. I'm referring display problem that you may still hear an audio from the device like welcome tone, alert tones or ringtones., and this solution covers for hardware troubleshooting only. 

Some white screen are cause by a firmware failure. So, if you may try to figure it out either you will do a software or hardware calibration do things as follows. 
Power up the device, observe if you can still hear any welcome tone. Try to send message or call the phone and see if the alert or ringtones is still in there. If you do can still hears it, then the problem is on hardware failure, If there is no response at all and just stock in white screen then the problem lies on firmware.


How to fix Nokia C2-03 White screen and other display problems such as blue screen, blank or empty screens. 

If you try to fix firmware problem, simply flash the phone to it's original firmware version. The firmware version for Nokia C2-03 is RM-702.

If you do have hardware problem, follow the simple hints below. 
1) Check the flex and LCD pin to pin connections, ensure that it is properly in good contact. A weak or loosen contacts will cause the display problem. 
2) Check the LCD screen for possible damaged or cracked. If you ain't sure better have a extra LCD at hand just for a quick test. 
3) Check the flex ribbon cable for possible damaged. Since Nokia C2-03 is  a slider phone, the possibility of display problem is cause by flex failure.
4) If both the flex and LCD were already confirmed working and okay. You may then proceed in troubleshooting certain components on the Nokia C2-03 PCB board.
5) See the solution below, check the highlighted components surrounding, clean it if there is an oxidation spotted. 

View larger image here.
6) Check each of the display filter components, do rework, resolder or replace it. 
This solution may also works on Nokia C2-06 and Nokia C2-08 dual SIM card phones, because both are the same as of Nokia C2-03 PCB board.

Nokia E5 LCD Display Light Problem, DarK Screen Solution

Nokia E56 dsiplay light problem jumper ways

This solution may possibly help fix the Nokia E5 Display light problem.  This kind of problem  shows a dark screen displays on the LCD because a lack of illuminating backlight LED on the back of the LCD screen.
This may happen if the phone suffered wet or water damaged, accidentally dropped by the users.

Just refer to the solution below and locate the primary components that needs to be check first.

Nokia E5 Display Light Jumper Ways - connection track


Troubleshooting hints on Nokia E5 LCD display light problem:
1. First try to replace the LCD screen display module.
2. Check the LCD pin connector, clean, re-solder it if necessary.
3. Check/read the VBAT voltage across the inductor coil, check the inductor coil too, replace if found damaged.
4. Trace the connection line paths of VLED-, VLED+ and the switching line.
5. Check/ replace the resistors near the LED driver IC.
6. Rehot, rework or replace the LED driver IC.

Most Download


Text Widget

Copyright © Best All mobile Repairing solutions | Powered by Blogger

Design by Anders Noren | Blogger Theme by NewBloggerThemes.com